STS-WM2, STS-WM3
Wall Mount Air Separators
Finally, a machine that literally pays for itself. The Wall Mount Air
Separator System uses a pressurized vacuum method to provide high efficiency
cleaning and precise upgrade separations of various agricultural and industrial
products. Its ability to separate less viable and immature seeds, improves
the quality of the lot and therefore, enhances seed germination. In addition,
the user has the ability to control air flow and feed rate which helps to achieve purity.
When seed enters the feed chute, the light, split, and broken seed, chaff and
other debris are lifted by air flow up through the column and are separated
into 2 or 3 batching compartments (depending upon the model).
Seed Separator Features
- Two modes of operation: permanent continuous feed or small lot batch separation (lab model only)
- Total visibility of all product movement
- User friendly
- Responsive air and product control
- Safety flow relay switch prevents seed contamination
- Calibration is fast and simple
- Few moving parts
- Environmentally clean
- Fits into small areas
- Portable and locking wheel vacuum system (WM2D & WM3)
Seed Separator Uses
- General Cleaning: The STS-WM2 & STS-WM3 can be used to clean
seed by removing large particle/granular debris, chaff, inert material,
pieces of broken seeds and other light unwanted materials.
- Close Grading: The STS-WM2 & STS-WM3 can be used to "grade"
seed based on density or volume weight (e.g., removal of light seed
or insect damaged seed.)
- Precision Upgrading: Detailed upgrading ,based upon a stratified,
vacuum pressurized, calibrated air stream. The STS-WM2 & STS-WM3 will
separate partially filled and immature seeds and improve the quality
of the lot and therefore, enhance seed lot viability and germination.
Proven Seed Separation
The STS-WM2 Series, STS-WM3 & the STS-MC3 separators have been proven to be highly effective in upgrading product and has accomplished what other processing machines
do collectively using only a single-step process.
The WM2 Series, WM3 & the MC3 models has been proven to recover seed losses from other processing machines. As much as 25-50% more seed yield was gained from the recovery with the same or higher germination.
Seed Separator Specifications
| STS-WM2 Lab | (Approx.) |
|---|
| Overall Dimensions: | height: 48"
width: 22"
depth: 18" (w/shelf section) |
| Vibrator Feeder: | 115 V/60 Hz (AC single phase) |
| Wall Controller: | 115 V/60 Hz (AC single phase) |
| Total System: | 16 AMPS |
| Seeds per lb. Capacity | up to 50 lb/hr. (depending on product density) |
| STS-WM2-SV | (Approx.) |
|---|
| Overall Dimensions: | height: 60"
width: 26"
depth: 22" (w/shelf ection) |
| Vibrator Feeder: | 115 V/60 Hz (AC single phase) |
| Wall Controller: | 115 V/60 Hz (AC single phase) |
| Automatic Vacuum Control | 115 V/60 Hz (AC single phase) |
| Total System: | 16 AMPS |
| Seeds per lb. Capacity | up to 75 lb/hr. (depending on product density) |
Seed Separator Options:
- Vibratory feeder 230V, 60Hz(AC single phase)
- Controller 230V, 50/60 Hz (AC single phase)
- Vacuum 230 V. 50/60 Hz (AC three phase)
Smaller and larger scale models available - built to customer specifications.
These specifications are general and are subject to change without notice.
|
